AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes
Redwing Leading Edge Protective Foam Aerotape Contact!

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

 

HOME

aerospace foam protection

TOTAL PROTECTION

PROTECTIVE FOAM

PAINTING & STRIPING

HEAVY MAINTENANCE

INTERIOR SHOP

COMPOSITE SHOP

FLAME RETARDANT

PRESERVATION TAPES

CARPET TAPES

GALLEY TAPES

PIT CARGO TAPES

ALUMINUM FOIL TAPES

 

MISC TAPES

aerospace tapes

 

MIXING TUBES

EPOXY GUNS

 

huntsman

EPIBOND

EPOCAST

URALANE

ARALDITE

polyken patco adhesives

#108FR CARPET TAPE

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

#1800FR GALLEY TAPE

#8300 EROSION TAPE

#D9100FR FLOOR TAPE

#D9180FR FLOOR TAPE

maskoff protex

PROTEX

 

intertape

#111 PROTECTIVE TAPE

PG-21A MASKING TAPE

#591 DBL PAPER TAPE

company info

WHO WE ARE

LINE SHEET

CROSS REFERENCE SHEET

RFQ

SEARCH

AOG Orders

 
Patco's_1800
Flame Retardant Galley Tape
1800 is a linered Flame Retardant, heavy duty black vinyl anti-corrosive protective tape
AEROSPACE APPLICATION
1800 is designed as a barrier to protect aircraft decking from corrosion and wear. Specifically, 1800 is geared for use in the galley, lavatory, and entry sections of the aircraft where the decking may be exposed to liquids or moisture. Its Flame Retardant properties make it safe and ideally suited for use on an aircraft.
SPECIAL FEATURES
Every shipment of 1800 is shipped with an FAA form 8110-3 Burn Test Certificate from the manufacturer confirming conformance to F.A.R. 25.853B.

A release liner makes it easy to apply the wide rolls: available in 18", 19", 24" and 36" wide rolls.

SPECIFICATIONS
F.A.R. 25.853B
TECHNICAL DATA
Substrate_________________Black Polyvinyl Chloride Flame
_________________________Retardant Film
Substrate Thickness
_______.0085", .216 (mm)
Adhesive
__________________Acrylic Based Pressure Sensitive
Thickness (Total)
_________.010", .254 (mm)
Release Liner
_____________53 lb Silicone Release Liner
Tensile Strength
__________25 lbs./inch width (438 N/100mm)
Elongation (at break)
_____200%
Adhesion (to steel)
_______32 oz./inch width (35 N/100 mm)
Adhesion (to backing)
_____18 oz./inch width (20 N/100 mm)
Water Penetration Rate
____.335 g/100 in.sq./24 hr.
Abrasion Resistance
_______Good
Chemical Resistance
_______Good
Ultra Violet Resistance
___Excellent
Application Temperature
___50 to 120 F______10 to 49 C
Operating Temperature
_____-40 to 200 F ____-40 to 93 C
 
407-426-9175
 
8750 Exchange Dr. Unit #5
Orlando, Florida 32809

Copyright © 2008 T.A.P.E., INC. (Aerotape). All Rights Reserved.