AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes
Redwing Leading Edge Protective Foam Aerotape Contact!

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

 

HOME

aerospace foam protection

TOTAL PROTECTION

PROTECTIVE FOAM

PAINTING & STRIPING

HEAVY MAINTENANCE

INTERIOR SHOP

COMPOSITE SHOP

FLAME RETARDANT

PRESERVATION TAPES

CARPET TAPES

GALLEY TAPES

PIT CARGO TAPES

ALUMINUM FOIL TAPES

 

MISC TAPES

aerospace tapes

 

MIXING TUBES

EPOXY GUNS

 

huntsman

EPIBOND

EPOCAST

URALANE

ARALDITE

polyken patco adhesives

#108FR CARPET TAPE

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

#1800FR GALLEY TAPE

#8300 EROSION TAPE

#D9100FR FLOOR TAPE

#D9180FR FLOOR TAPE

maskoff protex

PROTEX

 

intertape

#111 PROTECTIVE TAPE

PG-21A MASKING TAPE

#591 DBL PAPER TAPE

company info

WHO WE ARE

LINE SHEET

CROSS REFERENCE SHEET

RFQ

SEARCH

AOG Orders

 
Epocast_1671-A/B
Quick Set Syntactic
Epocast 1671-A/B is a semi-paste epoxy compound designed for potting fasteners in honeycomb structures. It is easily extruded through 1/8? nozzle orifice, but is self-leveling after application. Epocast 1671-A/B sets quickly at room temperature and develops excellent flame resistance meeting the requirements of FAR 25.853B in most composite assemblies.
SPECIFICATIONS
FAR 25.853B
Federal Express SRZ-25-005
Grumman GR 110 PF 2 Rev B
TECHNICAL DATA
Property _________________________1671-A ____1671-B _1671-A/B __Test Method
Color
____________________________Off-white_ Amber __Off-white _Visual
Density, g/cc.
___________________0.61 ______0.97 ___0.70 ______ASTM-1622
Viscosity, centipoise @ 77°F
_____Semi-paste 1,500 __Semi-paste ASTM-D-2196
Gel time, 50 gms at 77°F, minutes --
________-- _____12-20 _____ASTM-D-2471
Shelf life at 77°F, unopened, months 12
_____12 _____-- ________--

MIX RATIO
To 100 parts by weight of Epocast 1671-A, add 13 parts by weight of Epocast 1671-B. Mix both components thoroughly for several minutes to assure complete blending.

CURE SCHEDULE
24 hours at 77°F or gel at room temperature plus five hours at 125°F.

TYPICAL CURED PROPERTIES (Not for specification purposes)
Test
___________________________________________Result _________Test Method
Compressive strength
_____________________48 MPa ____7 ksi _____ASTM-D-695
Compressive modulus
______________________1,725 MPa _250 ksi ___ASTM-D-695
Tensile lap shear, chromic acid
_etched aluminum _________________________7MPa ______1,000 psi _ASTM-D-1002
Weight change, 24 hours immersion at 77°F, %
___________________ASTM-D-543
Mil-S-3136, Type III test fluid
_________________+0.1
Mil-M-5606 hydraulic fluid
______________________+1.0
Skydrol 500A
____________________________________+1.0
Distilled water
_________________________________+1.5
Flammability, 60 second ignition,
_self-extinguishing, seconds ____________________<5.0 __________FAR 25.853B
burn length, inches
_____________________________<4.0
Heat Release (neat material only)
_______________51/13 _________O.S.U.
Smoke Density (neat material only) D8
___________104 ___________N.B.S.

 
 
8750 Exchange Dr. Unit #5
Orlando, Florida 32809
407-426-9175

Copyright © 2008 T.A.P.E., INC. (Aerotape). All Rights Reserved.