AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epocast_1636-A/B High Temperature Potting Compound
Epocast 1636-A/B is a high performance two part epoxy casting system with outstanding strength and high temperature resistance. The aluminum filled, medium viscosity compound is easy to handle and machines easily in the cured state. It is used to reinforce honeycomb structures.

SPECIFICATIONS
BMS 5-28, Type 6 Rev AD Boeing D800-10411-1 (PDD 6-1) Gulfstream GMS 4005 TY 1 CL C FMII SCN 6 Navy 6624763 Navy 6710293 Rev A ROHR RITMS 5-28 TY 6 Rev A

TECHNICAL DATA
Property__________________________ 1636-A _1636-B ____1636-A/B _Test Method Color _____________________________Gray ___Dk. Amber _Gray _____Visual Density, g/cc _____________________1.73 ___1.07 ______1.72 _____ASTM-D-792 Viscosity, centipoise at 77°F _____38,000 _1,000 _____29,000 ___ASTM-D-2196 Gel time, 50 gms at 77°F, minutes__-- _____-- ________120 ______ASTM-D-2471 Shelf life at 77°F, unopened, months 12 ___12 ________-- _______-- MIX RATIO To 100 parts by weight of Epocast 1636-A, add 8 parts by weight of Epocast 1636-B. Stir both components thoroughly for several minutes until completely mixed. Mix carefully to minimize air entrapment. CURE SCHEDULE: 7 days at 77°F, or gel at 77°F and raise temperature approximately 5-7°F per minute to 260°F, hold 90 minutes, or 350F°, hold 60 minutes. TYPICAL CURED PROPERTIES (Not for specification purposes) Test ________________________________________________Result ____Test Method Compressive strength, Ksi ______________________________________ASTM-D-695 _7 days at 77°F _____________________________________16.0 ______-- _Room temperature gel plus 1½ hours at 250°F ________28.0 ______-- _Tested at 77°F after 14 days at 350°F ______________28.0 ______-- _Tested at 350°F after 14 days at 350°F _____________5.0 _______-- Compressive modulus, Ksi _7 days at 77°F _____________________________________800 _______ASTM-D-695 _Room temperature gel plus 1½ hours at 250°F ________600 _______-- _Tested at 77°F after 14 days at 350°F ______________500 _______-- _Tested at 350°F after 14 days at 350°F _____________40 ________-- Tensile lap shear, etched AL/AL, psi ________________2,000 _____ASTM-D-1002 Flammability _______________________________self-extinguishing _BSS-7230-F4 Weight gain on immersion after 24 hours at 77°F, % _____________ASTM-D-543 _TT-S-735, Type III test fluid ______________________<0.1 ______-- _Mil-M-5606, hydraulic fluid ________________________<0.1 ______-- _Skydrol hydraulic fluid ____________________________<0.1 ______-- _Distilled water ____________________________________<0.1 ______--


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809
	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175