AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epocast_1616-A/B Low Density Syntactic

Epocast 1616-A/B is an epoxy syntactic compound developed as an edge sealant for honeycomb structures. Special features of flame resistance, high strength, low density, and ease of handling have been incorporated into this system. Epocast 1616-A/B cures to an off-white color.

SPECIFICATIONS
BMS 5-28, Type 16 Rev AD ROHR RITMS 5-28 TY 16 Rev A

TECHNICAL DATA
Property ___________________________1616-A___ 1616-B _1616-A/B_ Test Method Color ______________________________Off-white Amber __Off-white Visual Density, g/cc ______________________0.65 _____1.00 ___0.70 _____ASTM-D-1622 Viscosity, centipoise @ 77°F _______Paste ____400 ____Paste ____ASTM-D-2196 Gel time, 60 gms at 77°F, minutes __-- _______-- _____30 _______ASTM-D-2471 Shelf life at 77°F, unopened, months 6 _______6 ______-- _______-- MIX RATIO To 100 parts by weight of Epocast 1616-A, add 7 parts by weight of Epocast 1616-B. Mix both components thoroughly for several minutes to assure complete blending. CURE SCHEDULE: 24 hours at 77°F or gel at room temperature plus five hours at 125°F. TYPICAL CURED PROPERTIES (Not for specification purposes) Test_________________________________________________ Result _Test Method Tensile lap shear, after 5 hours at 125°F, psi _______750 ____ASTM-D-1002 Compressive strength, Ksi at 77°F ____________________5.50 ___ASTM-D-695 Compressive modulus, Ksi at 77°F _____________________150 ____-- Flammability, horizontal _________________________self extinguishing -- vertical _________________________________________self extinguishing -- Flow at 77°F, inches, maximum ________________________0.2 ____BMS-5-28 at 125°F _____________________________________________1.0 ____-- Weight gain on immersion after 24 hours at 77°F, % ___________ASTM-D-543 TT-S-735, Type III test fluid ________________________1.0 ____-- Mil-M-5606 hydraulic fluid ___________________________2.2 ____-- Skydrol 500-A ________________________________________3.1 ____-- distilled water ______________________________________2.0 ____--


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809
	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175