AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epocast_1615-A/B Low Density Syntactic

Epocast 1615-A/B is an epoxy syntactic compound developed as an edge sealant for honeycomb structures. Special features of flame resistance, high strength, low density, and ease of handling have been incorporated into this system. Epocast 1615-A/B cures to an off-white color.

SPECIFICATIONS
BMS 5-28, Type 12 CL 2 Rev AD Northrop Grumman NMS-279 ROHR RITMS 5-28 TY 12 CL 2 Rev A

TECHNICAL DATA
Property _________________________1615-A ____1615-B _1615-A/B __Test Method Color ____________________________Off-white_ Amber __Off-white _Visual Density, g/cc ____________________0.65 ______1.05 ___0.70 ______ASTM-D-1622 Viscosity, centipoise ____________Paste _____400 ____Paste _____ASTM-D-2196 Gel time, 50 gms at 77°F, minutes -- ________-- _____15 ________ASTM-D-2471 Shelf life at 77°F, unopened, months 6* _____6 ______-- ________-- NOTE: Resin/filler separation may occur in 1615A. Material must be remixed before dispensing from container. MIX RATIO* To 100 parts by weight of Epocast 1615-A, add 14 parts by weight of Epocast 1615-B. Mix both components thoroughly for several minutes to assure complete blending. CURE SCHEDULE: 24 hours at 77°F or gel at room temperature plus five hours at 125°F. TYPICAL CURED PROPERTIES (Not for specification purposes) Test ___________________________________________Result _________Test Method Tensile lap shear, after 5 hours at 125°F, psi _700 ____________ASTM-D-1002 Compressive strength Ksi at 77°F _______________6.0_____________ASTM-D-695 Compressive modulus Ksi at 77°F ________________450 ____________-- Flammability, horizontal _______________________self extinguishing -- _vertical ______________________________________self extinguishing -- Flow at 77°F, inches, maximum __________________1.0 ____________BMS-5-28 _at 125°F ______________________________________2.0 ____________-- Weight gain on immersion after 24 hours at 77°F, % _____________ASTM-D-543 _TT-S-735, Type III test fluid _________________1.0 ____________-- _Mil-M-5606 hydraulic fluid ____________________2.1 ____________-- _Skydrol 500-A _________________________________2.0 ____________-- _distilled water _______________________________2.0 ____________--


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809
	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175