AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epibond_1210 A/B General Purpose Adhesive
Epibond 1210-A/B is a two part epoxy adhesive with semi-paste consistency.

AEROSPACE APPLICATION
This adhesive product is ideal for spacecraft application due to its low outgassing properties. Epibond 1210-B can be used at varying ratios up to 100 parts by weight with Epibond 1210-A to achieve a more flexible bond line. The adhesive may be applied by brush, spatula, or automatic dispensing equipment. Epibond 1210-A/B bonds metal, wood, wood products, glass, ceramics, most plastics and many other materials..

SPECIFICATIONS
Airspace Tech ATC-AD 0001 Rev NC Collins Radio 005-1646 Rev D Cubic Defense Systems 22097 Rev D General Sys Solutions 604857 Rev J Kearfott Y105A040 Rev A Loral 23-P12027-0001 Rev 6 Raytheon 440348 Rev L

TECHNICAL DATA
Property __________________________1210-A___1210-B___1210-A/B___Test Method Color _____________________________Tan _____Amber ___Tan _______Visual Specific gravity __________________1.5 _____1.00 ____1.30 ______ASTM-D-792 Viscosity, centipoise _____________250,000 _30,000 __Semi-Paste ASTM-D-2393 Flash Point, COC, °F ______________490 _____275 _____-- ________ASTM-D-92 Work life, 100 gms at 77ºF, minutes _-- ____-- ______50-75 _____ASTM-D-1338 Shelf life at 77ºF, unopened, months 12 ____12 ______-- ________FTM-204 Solids, % ___________________________-- ____-- ______100 _______ASTM-D-1644 MIX RATIO To 100 parts by weight of Epibond 1210-A, add 65 parts by weight of Epibond 1210-B. Mix both components thoroughly for several minutes to insure complete and uniform mixing. Up to 100 parts by weight of Epibond 1210- B may be used for more flexible bonds. CURE SCHEDULE 48 hours at 75-80ºF, or 2 hours at 150°F, required for full cure. TYPICAL CURED PROPERTIES (Not for specification purposes) Test _________________________________________________Result _Test Method Maximum service temperature, °F, _____________________200 ____ASTM-D-648 Tensile lap shear, aluminum to aluminum, at 77ºF, psi 2,500 __ASTM-D-1002 steel to steel at 77ºF, psi __________________________2,500 __-- steel to steel at 150°F, psi _________________________500 ____-- polyester to polyester at 77°F, psi __________________1,800 __-- Fluid Immersion 7 days at 75°F, psi __________________________ASTM-D-1002 JP-4 2,_______________________________________________550 ____-- Skydrol 2,____________________________________________600 ____-- Distilled Water 2,700 -- Outgassing: TML, % ___________________________________0.65 ___ASTM-E-595 CVCM, % ______________________________________________0.01 ___-- Hardness, Shore D ____________________________________80 _____ASTM-D-2240


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175