AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epibond_1210 A/9861 High Temperature Adhesive
Epibond 1210-A/9861 is a two part epoxy paste adhesive which gives good properties at temperatures up to 300ºF.

AEROSPACE APPLICATION
This adhesive product is ideal for spacecraft applications due to its low outgassing properties. It mixes to a semi-paste consistency and may be applied in glue lines of up to 50 mils for gap filling applications. Epibond 1210A/9861 bonds metals, composite laminates, most thermoplastics and rubbers and many other dissimilar materials.

SPECIFICATIONS
Collins Radio 005-1646 Rev D Lockheed Martin LAC 30-4639-0200 Rev G Loral 23-P12027-0003 Rev 6 Loral LVM100 Rev G Navy 639AS6608 Rev C Sutherland KMB-2330-PSS1

TECHNICAL DATA
Property ________________________1210-A ___9861__ _1210-A/9861 _Test Method Color ___________________________Tan ______Amber __Tan _________Visual Density, g/cc. __________________1.49 _____1.00 ___1.35 ________ASTM-D-792 Viscosity, centipoise ___________250,000 __16,000 _Semi-Paste __ASTM-D-2196 Gel time, 100 gms at 77ºF, minutes -- _____-- _____35-60 _______ASTM-D-2471 Shelf life at 77ºF, unopened, months 12 ___12 _____-- __________-- MIX RATIO To 100 parts by weight of Epibond 1210 A, add 20 parts by weight of Hardener 9861. Mix both components thoroughly for several minutes to assure complete blending. CURE SCHEDULE 48 hours at 77ºF, or gel at room temperature plus one to two hours at 150ºF. Elevated temperature properties are improved with post cure of one hour at service temperature. TYPICAL CURED PROPERTIES (Not for specification purposes) Test______________________________________________ Result__ Test Method Tensile lap shear: AL/AL at 77ºF, psi _____________2800 ____ASTM-D-1002 at 200ºF, psi _____________________________________2500 ____-- at 300ºF, psi _____________________________________500 _____-- After fluid immersion, 7 days at 75ºF ______________________ASTM-D-1002 JP-4 ______________________________________________2700 ____-- Skydrol ___________________________________________2400 ____-- Distilled Water ___________________________________2400 ____-- Outgassing: TML, % ________________________________0.77 ____ASTM-E-595 CVCM, % ___________________________________________0.00


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809
	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175