AEROTAPE | Aircraft Protection, Epoxy, Adhesives, Tapes

We give you access to the most comprehensive on-line collection of Tapes, Adhesives and Protective Products for the Aerospace Industry! And we've been doing it for over 14 YEARS!

HOME

#290FR PIT-CARGO TAPE

#296FR PIT-CARGO TAPE

CROSS REFERENCE SHEET

RFQ

AOG Orders


Epibond_104 A/B Gap Filling Epoxy
Epibond 104-A/B is two-part epoxy adhesive. This cream colored, non-flowing, paste forms an excellent bond to metals, plastics, concrete and rubber.

AEROSPACE APPLICATION
Because of its viscosity, Epibond 104-A/B has good gap-filling properties and may be applied to vertical surfaces. Surfaces to be bonded must be clean and dry. It may be used for honeycomb edge sealing, concrete patching, rigid foam sealant, vibration dampers, press pads, etc. This product is also available in different work life versions - Epibond 104-A/946 and Epibond 104-A/9831.

SPECIFICATIONS
Allied Signal 2149009 Beech BS 201 Rev AA

TECHNICAL DATA
Property _____________________1337-A __9514-B __1337-A/9514-A __Test Method Color ________________________Cream____Amber ___Cream __________Visual Density, g/cc. _______________1.15 ____0.98 ____1.12 ___________ASTM-D-792 Viscosity, centipoise ________Paste ___35 ______paste_________ _ASTM-D-2196 Gel time, 100 gms at 77ºF, minutes -- _-- ______30-40___________ASTM-D-2471 Shelf life at 77ºF, unopened, months 12 12 _____-- _____________-- MIX RATIO To 100 parts by weight of Epibond 104-A, add 10 parts by weight of Epibond 104-B. Mix both components thoroughly for several minutes to insure complete and uniform mixing. CURE SCHEDULE Three days at 77ºF, or 24 hours at 100ºF, or one hour at 150ºF. TYPICAL CURED PROPERTIES (Not for specification purposes) Test ________________________________________________Result __Test Method Tensile lap shear, AL/AL, psi at -67ºF ______________1800 ____ASTM-D-1002 at 77ºF _____________________________________________2500 ____-- at 200ºF ____________________________________________800 _____-- Compressive strength at 77ºF, Ksi ___________________13.0 ____ASTM-D-695 Hardness, Shore D ___________________________________79 ______ASTM-D-2240 Two hours boiling water, % weight gain ______________<1.0 ____ASTM-D-570


	8750 Exchange Dr. Unit #5 Orlando, Florida 32809
	8750 Exchange Dr. Unit #5 Orlando, Florida 32809	407-426-9175